360ct Address Labels 1"x2 5/8" White - up&up™: Label Stock Paper, Mailing Template, Printer Format, 360 Pack

A: Actually the 8160 template doesn't work because the labels actually measure 15/16" so each one down the page is a little more crooked. These are junk. Buy Avery.

A: As of 12/6/2019 the labels come with instructions for the template and suggest using Avery 5160 labels. There are instructions on the back of each page of labels, so Target seems to have corrected the complaints of no instructions.

A: Actually the Avery 8160 does NOT work with this UP&UP!

A: Hello caitlyn - Great question! The Recycled Address Labels 360ct is perfect when mailing family and friends. The following steps will help you set up the labels for printing: For Microsoft Word: • Select New Document • Select Mailings • Select Labels (from left side of bar) • Select 30 Per page Address Labels from the box that pops up • Choose “Full Page of Same Label” or “Single Label” o vertical or horizontal layout • Enter Text • Print You can also use the Avery Template for the 30 per page address labels that can be downloaded from the Avery website. It is the same layout as Avery 8160 – 30 labels per page. I hope this helps. Enjoy your shopping! - Yamell

A: Yes. Make sure you set the paper type to label as this will slow it down and allow it to remain on the fuser for longer. Thicker paper needs more heat to fuse the toner. The toner will just fall off if you leave the paper type as plain paper.

A: Hi Cheryl - Thanks for asking. We've double checked, and these labels are marked as being compatible with most inkjet and laser printers. Hope this helps. Enjoy the rest of your day. -Michael

A: No. Do not use them with laser printers! I did and the toner did not fuse correctly, lots of my labels rubbed off in the mail.

A: Hi there, Thank you for your interest in the 360ct Address Labels 1"x2 5/8" from up&up. We recommend pacing the label sheet with the matte white side facing up in the printer tray. Hope that helps!

A: Hello JR - Thank you for your interest in the 360ct Address Labels 1"x2 5/8" from up&up. We recommend pacing the label sheet with the matte white side facing up in the printer tray. Happy shopping! - Cynthia

A: Hi Sheila, We will investigate this and look to improve. Thank you for your feedback.

A: Hi Alison, Thank you for your interest in our Recycled Address Labels! The labels are completely white, as the graphic shown on the packaging is an example

A: Hi Timothy, These Up & Up Address labels are compatible with Avery Template 5160 available for download from the Avery website. Please note: all computer, program and printer settings are not designed equally. A test sheet is recommended prior to the final printing. Margin adjustments may be required.

A: Note that these are NOT 1" height labels (presuming portrait orientation). Actually .981" height per label, as far as I can tell (10 labels is 9 13/16"). Use Avery 8160 (which is for 1" labels) and customize as follows: 1. Download Avery 8160 template 2. Click to select the table (like the little + sign, but with arrows at the end of all the lines) 3. Right click and select "Table Properties" 4. Go to the Row tab 5. Where it says "Size," it should say 1" with the "exactly" box checked. Change 1" to 0.98" and click "OK." That should do it.

A: Yes. They are very easy to write on with marker, pen or even pencil. So its perfect for teachers give kids labels and they write there name on it and stick it on notebooks, book bins or even desks.