JBL Professional Control 28-1 2-Way 8 Inch Indoor/Outdoor Speakers - Pair (White)

The Control® 28-1 is a two-way 8” speaker with rich sonic character wide coverage consistent coverage versatile mounting and a contemporary high-design look that fits into a wide range of decors This makes Control 28-1 an excellent choice for a wide variety of applications including retail stores restaurants health clubs theme parks educational facilities hospitality music cafes leisure venues and anywhere where a top quality high-output indoor/outdoor foreground/background music (and/or paging) speaker is required.

Features
•8” Woofer with Woven Fiberglass Cone
•1” PEI Diaphragm Tweeter with Fluid Cooling
•Contemporary High-Design Appearance
•Built-In InvisiBall® Mounting Hardware
•Weather Resistant Enclosure Transducers
•Wide 100° x 100° Coverage
•120 Watt Power Handling (240 Watt program) In Direct 8Ω Setting
•Built-In 60 Watt 70V/100V Multi-Tap Transformer
•Broad Frequency Response: 45 Hz – 20 kHz

What's in the Box
•Control 28-1 2-Way 8 Inch Indoor/Outdoor Speakers - Pair
•InvisiBall Wall-Mounting System
•Hex Key
•Manual

Specifications
•General
•Frequency Range (-10 dB): 45 Hz to 20 kHz
•Frequency Response (+/-3 dB): 62 Hz - 16 kHz
•Power Rating: 240 W Continuous Program (2 hrs) ; 120 W (480W peak) Continuous Pink Noise (2 hrs) ; 90 W (360W peak) Continuous Pink Noise (100 hrs)
•Maximum Input Voltage: 27.5 V RMS (2 hrs) 55.0 V peak
•Maximum SPL: 112 dB ave. Continuous Pink Noise (118 dB peak)
•Sensitivity: 91 dB 1W/1m (ave. 100 Hz – 10 kHz)
•Coverage Angle: 100° x 100°
•Directivity Factor (Q): 7.3 (averaged 1kHz – 16kHz)
•Directivity Index (DI): 8.3 dB (averaged 1kHz – 16kHz)
•Nominal Impedance: 8 ohms (THRU setting)
•Crossover Type: 2nd order low-pass 1st order high-pass plus conjugate shaping
•Transformer Taps: 70V = 60W 30W 15W 7.5W ; 100V = 60W 30W 15W ; Insertion Loss = 0.94 dB at any tap setting ; Thru Setting = 8Ω nominal
•Recommended Protective High-Pass: 45 Hz high-pass (24 dB/oct) for 8Ω operation plus 15W and 7.5W taps; 55 Hz for 30W tap; 65 Hz for 60W tap.
•Low Frequency Driver: 200 mm (8 in) woven-fiberglass cone with pure butyl rubber surround with Weather-Edge frame protection high-temp fiberglass voice coil former high-temp voice coil wire optimized cone geometry linear suspension spider and FEA optimized motor structure.
•High Frequency Driver: 25 mm (1 in) PEI diaphragm low-viscosity ferro-magnetic fluid and lightweight Kapton™ voice coil former.


•Dimensions
•Dimensions (H x W x D): 11.1" x 15.2" x 8.6”; 10.9” deep total when mounted on InvisiBall wall-mount bracket.
•Net Weight: 15.0 lbs.


•Design
•Enclosure Material: High Impact Polystyrene (HIPS) with 10% glass fill painted with highly-UV resistant paint on white (-WH) version for maximum UV fade resistance.
•Grille: Highly zinc-plated finished in durable TGIC polyester powdercoating. MTC-28WMG-1 (-WH) available with WeatherMax™ multi-layer foam and tight-weave mesh vapor barrier backing.


•Installation
•InvisiBall wall-mounting system included.
•Two 6 mm attachment points on top and bottom for optional MTC-28WMG-1 (-WH) U-bracket.
•Secondary safety attachment loop point on back panel.


•Environmental
•IP-44 per IEC529.
•IP-55 when installed with the optional MTC-28WMG-1 WeatherMax™ grille and either MTC-PC2 or MTC-PC3